oxy acetylene torch kit

The reality of an intruder having an oxy acetylene torch kit to gain access into a safe

Burning through a safe wall is a technique that thieves use to gain access to the contents of a safe. It is a dangerous and illegal act that can have serious consequences for the perpetrator. In recent years, thieves have been using an oxy acetylene torch kit to burn through safe walls. This type of kit is readily available and can be purchased online or at a hardware store.

The danger of thieves having an oxy acetylene torch kit, that is often available for under $300, is that it makes it easy for them to gain access to the contents of a safe. The combination of these two gases burns at a temperature of up to six thousand degrees Fahrenheit. This is hot enough to melt regular steel, which starts to turn into a liquid state at around five thousand degrees. This means that a thief can burn through a two-inch thick piece of steel in seconds. If a gun safe has a gauge of steel less than an eighth of an inch, a thief can easily burn through it in seconds.

The sad part is that the fire insulation or sheet rock found in most gun safes will keep the contents safe while the thief burns a hole large enough to remove the contents. Once the cutting is done, a thief will simply punch in the protective sheet rock and remove the contents from the safe! This is a face-saving security reality that can be easily prevented with the right type of safe.

The only two types of safes that prevent this type of theft are TRTL safes and stainless-steel constructed safes that have insulation composed of high-grade concrete. TRTL safes are rated as one of the highest levels of security available, and they are designed to withstand attacks from oxy acetylene torch kits. These safes have thick steel walls that are lined with a layer of high-strength concrete. This provides an added layer of protection against attacks.

Stainless steel constructed safes are another option for those who want to prevent this type of theft. These safes are made from a high-grade stainless steel that is resistant to cutting and drilling. They also have insulation composed of high-grade concrete, which provides an added layer of protection against oxy acetylene torch kit attacks.

In addition to choosing the right type of safe, there are other steps that you can take to prevent theft. One of the most effective ways to prevent theft is to keep your safe hidden. Thieves are more likely to target a safe that is visible and easy to access. If possible, keep your safe in a hidden location, such as a closet or basement. You can also install an alarm system to alert you if someone attempts to break into your safe.

Another effective way to prevent theft is to use a combination of locks. A safe with a combination lock is more difficult to break into than one with a key lock. You can also use a combination of locks, such as a combination lock and a biometric lock. This provides an added layer of security and makes it more difficult for a thief to gain access to your safe.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.